Automatic Aluminum Spacer Punching Machine
1. Summarize
Introducing our cutting-edge Automatic Hollow Glass Aluminum Bar Punching Machine, meticulously engineered for the precise installation of aerated components within hollow glass aluminum frames. This state-of-the-art equipment features automated drilling and installation, streamlining your production process with unparalleled efficiency and accuracy.
2. Technical Parameters and Technical Conditions
| item |
Numerical value |
| Power source |
voltage(V) |
AC220 |
| power(KW) |
0.50 |
| Working pressure (Mpa) |
0.2-0.5 |
| Component outer diameter (mm) |
5.2 |
| Overall dimensions (mm) |
complete machine |
452*400*1170 |
| Total weight (Kg) |
60 |
|
Conditions of Use
(1) Gas Source: The facility must supply an air source that satisfies the operational demands of air pressure, with a storage capacity under 0.30 cubic meters. Working air pressure should range between 0.3-0.5Mpa.
(2) Power Source: Requires a stable voltage of single-phase AC220V to ensure seamless operation.
3. Main Structure of Product
This sophisticated equipment integrates mechanical, pneumatic, and control components. The mechanical section encompasses positioning, horizontal and vertical pressing, drilling, top positioning facets. The control module is equipped with a control computer, power switch indicator, intermediate relay, foot switch, electric mill, and solenoid valve. Pneumatic actions are driven by high-performance cylinders.
4. Installation and Adjustment
4.1 Ensure the device is located in a dry setting with a level surface. Adjust the gap between the device and the ground to maintain superior stability.
4.2 Securely connect the power cable along with the main air source.
4.3 Tailor the position of the positioning plate according to aluminum strip dimensions, guaranteeing that the punching occurs precisely in the center.
5. Use Order and Method
5.1 Activate the power switch located on the electric cabinet's panel; the red power indicator light confirms the machine is operational.
5.2 Position the inflatable components atop the lower jacking positioning head.
5.3 Align the aluminum frame with the positioning plate, determine, and refine the hole positions for precision.
5.4 Engage the foot switch. The device will automatically finalize the positioning, pressing, drilling, and insertion of components, ensuring seamless execution.
6. Use Precautions:
6.1 Prior to initial use, thoroughly review the Instruction Manual. For any queries, contact the manufacturer's service line for expert guidance.
6.2 Refrain from unauthorized disassembly of the electrical control section without manufacturer guidance to prevent accidents and avoid modifying the controller to prevent electrical short circuits or unnecessary damage.
6.3 Exercise caution during operation. Keep hands clear of the drilling and pressing zones to ensure personal safety.
6.4 In emergencies, promptly turn off the power switch for immediate safety.
6.5 Regularly inspect the drill bit, as it is subject to wear. Replace it immediately if the drilling performance declines.
Seven. Care and Maintenance
7.1 It is advisable to install a gas filter at the compressed air outlet to safeguard the electromagnetic valve or cylinder from debris or moisture. Routinely clean the gas filter to prolong equipment life.
7.2 Ensure the removal of aluminum shavings from the machine after each shift. Clean during work interruptions to maintain optimal performance.
7.3 Regularly apply anti-rust oil to the countertops to preserve and protect the machinery.
){kind=link}