Premium Butyl Sealant for Insulating Glass and Window Applications

• Customization: Available
• Material: Butyl
• Application: Industrial
• Model NO.: customizable
• Certification: ISO, FDA, REACH, RoHS
• Use to: Insulated Glass
• Main Raw Material: Polyisobutylene
• Attribute: Hot Melt Sealant
• UV Resistance: Yes
• Temperature Resistant Range: Minus40degrees-130degrees
• Colour: White
• Transport Package: Wooden Box, Steel Frame
• Specification: 7kg/piece, 28kg/carton
• Origin: Shandong
• HS Code: 84752990
• Production Capacity: 3000 Kilogram/Kilograms Per Day
• Package Size: 36.00cm * 36.00cm * 25.00cm
• Package Gross Weight: 29.000kg

Product Description

 

Hot  melt butyl sealant

Description
Insulation Glass hot melt butyl is the first insulating glass sealant with permanent plastic. 
Product Description: Hollow glass butyl sealant is a single component, solvent free, and permanently plastic first layer of low density hollow glass sealant based on polyisobutylene. Suitable for curtain wall insulating glass and louver insulating glass. Due to its excellent ultraviolet resistance, good air tightness and extremely low water vapor transmission rate, it forms an excellent water vapor blocking and inert gas exchange system with other elastic sealants (the second sealant - polysulfide, silicone, etc.) to ensure the service life of insulating glass.
Features
High airtightness and excellent UV resistance.
Low density, high brightness, excellent extrusion.
Application Area
1.As a first insulating glass sealant in insulating glass production,to complete the double sealing with        Silicone sealant, polysulfide sealant.Keep the applying area clean and dry,use the special hot melt extrusion pump.
2.Extrusion temperature  at 120ºC-135ºC, environmental temperature >5ºC.
3.Control of the glue by adjusting the rubber pump with the difference of  the temperature.

Mainly used for first-step sealing of insulating glass and glass curtain wall, fridge and ice tank etc.

The temperature range is between 110-140 °C
 1. Appearance: homogeneous black putty.
 2. Odor: odorless.
 3. Denseness: forever ductility.
 4. Density: 1.10g/cm3 or less.
 5. SuitableTemperature: -40°C+80°C, keep the surface and edges and corners non-cracking,non-    drooped.
 6. Extruding temperature: 130°C or so.
 7. Viscosity of strength:2.5 × 10-3mPa or more (Hard Aluminum / Hard Aluminum.)
 8. Water Vapor Penetration Rate:10g / m³ or less.
 9. Ultraviolet Radiation Resistance: Qualified  

Packaging & Shipping

1	φ190mm × 7kg × 4 Column / Column
2	Φ180mm × 6kg × 4 Column / Column
3	φ160mm × 5kg × 4 Column / Column
4	Φ150mm × 5kg × 4 Column / Column
5	φ130mm × 2kg × 9 Column / Column
6	Φ120mm × 2kg × 9 Column / Column